Konica Minolta C250P - Manual (Page 90)

Setting up the printer driver 2
C250P 2-27
For Mac OS 9.2
After connecting this machine, it can be used as a printer by selecting the
PostScript printer from the Chooser and by specifying the printer description
(PPD) file.
First, copy the printer description (PPD) file onto the Macintosh computer.
1
Insert the Macintosh printer driver CD-ROM into the Macintosh com-
puter’s CD-ROM drive.
2
Open the OS 9_x folder in English\Driver on the CD.
3
Select the KONICAMINOLTAC250UVxxx.ppd file, and then copy it into
the Printer Description File folder in Hard Disk\System Folder\Exten-
tions.
Next, select a printer.
The printer driver can use a standard Macintosh LaserWriter.
4
On the Apple menu, click “Chooser”.
5
Make sure that “AppleTalk” is set to “Active”, and then click the “La-
serWriter” icon.
6
From the “Select a PostScript Printer” list, click the applicable printer
for the printing system, and then click the [Create] button.
The PostScript printer description (PPD) file selection screen appears.
? What should be done if a different PPD file has already been select-
ed?
% Click the [Setup] button, and then click the [Select PPD] button
from the screen that is already displayed.