Konica Minolta C250P User Manual
Page 346
Advertising
Replacing consumables
6
C250P
6-19
4
Load the new staple car-
tridge into the staple car-
tridge holder.
–
Do not remove the
remaining staples,
otherwise the ma-
chine will not be able
to staple after the
cartridge is replaced.
5
Insert the staple car-
tridge holder, making
sure the tabs on the
holder slide along the
rails in the compartment.
–
Check that the staple
cartridge holder is
securely installed.
6
Close the front door.
2
Reminder
Replace the staple cartridge only after the message has appeared.
If the staple cartridge is replaced before the message appears, the ma-
chine may be damaged.
Advertising