Konica Minolta C250P - Manual (Page 276)

Control panel settings 4
C250P 4-33
User Setting
This section describes the parameters and main settings that can be speci-
fied after pressing the [Menu/Select] key, then selecting “User Setting”.
Print Reports
System Setting
Power Save
Parameters Description Initial Setting
Meter Count Prints the total checklist. —
Check Consumable Prints the checklist for consumables. —
Settings Info. Prints a list of the machine settings. —
Font List Prints the font lists for PCL mode or PS
mode. —
Demo Page Prints the demo page. —
Parameters Description Initial Setting
Language Setting Specify the screen display language. English
Parameters Description Initial Setting
Low Power Specify the desired length of time (between
10 and 240 minutes) until the machine enters
Power Save mode. 10 Min.
Sleep Mode Select whether the machine automatically
enters Sleep mode (“ON” and “OFF”) and
specify the desired length of time (between
15 and 240 minutes) until the machine enters
Sleep mode.
Depending on the Service Mode setting, the
“ON” and “OFF” settings may or may not be
available. ON
15 Min.