Kodak 800 SERIES - Manual (Page 103)

Troubleshooting 4-4
NovaJet 800 Series Service Manual
Symptoms Possible cause Solution
Table 4-1. Troubleshooting Table (cont).
Internal ERROR
“Carriage Axis
Failure”
• dirty (or perform Slide Shaft
lubricated) slide Cleaning procedure
shaft
• perform Servo replace servo motor
Motor Winding
Resistance check
• check servo bad bearings -
motor for smooth replace servo motor
movement
• obstruction in remove obstruction
path of carriage
(may or may not
be visible)
• dirty encoder perform Encoder
strip Strip Cleaning
procedure
• dirt under the remove carriage
carriage bushings bushings and clean
• damaged replace encoder
encoder strip strip
• bad encoder replace encoder
sensor sensor
•worn outrigger replace outrigger
bushings bushings