Kodak 800 SERIES - Manual (Page 115)

Troubleshooting 4-16
NovaJet 800 Series Service Manual
Symptoms Possible cause Solution
Table 4-1. Troubleshooting Table (cont).
Fan Does Not
Power Up
• MPWA has 1) reseat connection
24 VDC at J3 at MPWA to fan
pins 1-2
2) replace fan
• power not being 1) reload firmware
applied to fan
2) replace MPWA
Media Take-Up
Motor Not Operat-
ing, Sensor Works
• printer not in put in Take-Up
Take-Up Mode Mode (under
“Supply Type” from
“Paper Option
Menu”)
• bad connection reconnect Take-Up
to the motor motor
• bad Take-Up replace Take-Up
motor motor
• faulty wiring leg reseat or replace
harness leg harness
• bad MPWA replace MPWA