Kodak 800 SERIES - Manual (Page 231)

NovaJet 800 Series Service Manual
Assembly\Disassembly 5-27
CARRIAGE BELT
BELT CLAMP
RIGHT POST OF
BELT CLAMP
LEFT POST OF
BUMP
Figure 5-17. Carriage Belt Clamp.
13. To disengage the Carriage Belt from the Belt Clamp, push the Carriage
Belt away from the left post of the Belt Clamp and gently lift up until
the bottom edge of the Carriage Belt clears the top of the left post.
14. Push the Carriage Belt away from the right post of the Belt Clamp and
gently lift up to finish removing the Carriage Belt from the Belt Clamp.
CAUTION
Failure to use an approved antistatic bag for storage or
shipment may cause damage to the Carriage PWA and
affect the Warranty.
15. Place the Carriage(s) in an ESD (antistatic) bag in preparation for
shipment to ENCAD for replacement or repair, or if it is to be stored for
repair at your facility.