Kodak 800 SERIES - Manual (Page 30)

General Description 1-7
NovaJet 800 Series Service Manual
Chapter 3 MAINTENANCE - This chapter covers the scheduled maintenance,
cleaning procedures and alignment/adjustments recommended to perform on
the printers. Diagnostics and a signal flow diagram are also listed.
Chapter 4 TROUBLESHOOTING - A table containing problems that could occur
and possible causes and repairs is found in this chapter. This table is not
intended to be a complete listing of troubleshooting procedures. It will
isolate the problem down to the lowest replacable assembly. If the problem
happens to be the wiring between assemblies, standard troubleshooting
techniques will have to be implemented to correct the problem.
Chapter 5 ASSEMBLY/DISASSEMBLY - Contains detailed procedures to
remove and replace printer parts and assemblies.
Chapter 6 PARTS LIST - Contains a complete listing of all field replacable parts
and assemblies for the color inkjet printers. Illustrated parts breakdown
drawings are included to help clarify and identify parts for ordering. Special
kits and adjustment jigs may also be required.
ORIENTATION - Instructions in this manual are based on the assumption that the
service person is facing the front of the printer. References to top view, back view, and
so forth are consistent with this engineering standard. References to the X Axis and
Y Axis (Paper Axis and Carrier Axis, respectively) follow the standard of
AutoCAD™ absolute coordinates: up and down for X, left to right for Y.