Kodak 800 SERIES - Manual (Page 238)

Assembly\Disassembly 5-34
NovaJet 800 Series Service Manual
Remove the Paper Sensor or the Encoder Sensor
1. Remove the Top, Left and Right Covers following procedures outlined
earlier in this chapter.
2. Remove the Ink Delivery System and the Carriage Assembly following
procedures outlined earlier in this chapter to remove the Carriage
Assembly from the Slide Shaft.
THIS PIECE OF PLASTIC
(ONE ON EACH SIDE) MUST
CLEAR THE RIDGES ON THE
UNDERSIDE OF THE HOLDER
PUSH DOWN ON
CLIP, PUSH DOWN
ON ENCODER,
THEN PULL OUT
TO REMOVE PAPER
SENSOR BOARD, GRASP
HERE AND PULL UP
Figure 5-21. Paper and Encoder Sensor Removal.