Kodak 800 SERIES - Manual (Page 54)

Maintenance 3-2
NovaJet 800 Series Service Manual
Cleaning Procedures
Always turn the printer OFF, remove the power cord and the inter-
face cable before cleaning the printer. An electrical shock hazard
may be present if these procedures are not followed.
External Cleaning
Do not use abrasive cleansers of any sort on the surfaces of the
printer. Damage to the surface may result.
The exterior surfaces of the printer may be cleaned with a soft cloth which has
been dampened. For more persistent stains, a small amount of liquid detergent
may be used. Cleaning intervals are determined by the environment in which the
printer is used.
Slide Shaft Cleaning
Use only isopropyl alcohol on the slide shaft of the printer. Dam-
age to the stainless steel slide shaft may result if cleaned with wa-
ter and not completely dried off.