Liebert 130 kVA - Manual (Page 65)

User Manual
Hipulse - Single Phase ‘1+N’ UPS System 130 kVA - 110V
45
5.12 Language Selection :
If required, select the appropriate language using the following procedure.
From ‘Default’ window, press ENTER key.
Select the FUNCTION and press the enter key.
A password must be entered to gain a further
access to next menu. The initial default password
of ‘00000000’ need not be changed at this point of
time. Press the enter key.
Select PANEL SET UP and press enter key.
Select LANGUAGE and press the ENTER key.
Use the UP push button to rotate through the available options and select the required
default language. The options are: English, Italian, German, French , Dutch &
Spanish.
Press ENTER to accept and store the language selection, then step back to the
default window by repeatedly pressing ESC as required; the current alarms should
now be stored in the selected language.
Note: Ensure the data entered during the following procedures are r3cordded in the appropriate
commissioning documentation.
5.13 Changing the current Date and Time
1. From DEFAULT WINDOW, pressing ENTER key, select MAINTENANCE >>
ENTER>> PASSWORD>> ENTER>> select and enter the line showing the time and
date.
2. Position the cursor on the row on which the date-time is displayed, and press
ENTER.
3. Using the 'UP' and 'DOWN' menu buttons, enter the current time and date
information.
4. Press ENTER to save the settings, then press ESC twice to return to the DEFAULT
WINDOW.
MEASUREMENT
>FUNCTION <
MAINTENANCE
SETUP
MEASUREMENT
>FUNCTION <
MAINTENANCE
SETUP
↑ WRITE SAVE ↵
↓ MOVE EXIT ESC
ENTER PASSWORD
00000000
↑ WRITE SAVE ↵
↓ MOVE EXIT ESC
ENTER PASSWORD
00000000
BATTERY TEST
GENERATOR
>PANEL SETUP <
NEXT PAGE
BATTERY TEST
GENERATOR
>PANEL SETUP <
NEXT PAGE
>LANGUAGE ENG <
TYPE 0000 MASTER
GROUP 1 UPS 1
PASSWORD 00000000
>LANGUAGE ENG <
TYPE 0000 MASTER
GROUP 1 UPS 1
PASSWORD 00000000