Panasonic 524X07801B - Manual (Page 100)

100 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 4. User Maintenance Section 700 - Operation
(For a description of Automatic Day/Night System Mode, see “Automatic Day/Night Mode” on page
39.)
You can specify exception days which allow for a range of days for the System to operate in the Night
mode. This is intended for extended holidays for business shut down periods that last for multiple
days. You can specify up to 6 exception day periods.
Operation
To set the Exception Day Modes:
Action Result
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See “To enter User Maintenance mode:” on
page 75.)
81-
User MAINT displays
2. At the 81 level, enter 07.
3. Press the HOLD key. 8107-
System Mode displays
4. Enter 2.
5. Press the HOLD key. 2-
Mode Except Day displays
6. Press the HOLD key. 200 :MMDD
PTN 1 Start Day displays
7. Enter the start date by month (two characters) and day (two
characters) for Exception Period 1.
Note: To clear an entry or existing data, press the FLASH
key.
8. Press the HOLD key. 201 :MMDD
PTN 1 Stop Day displays
9. Enter the stop date by month (two characters) and day (two
characters) for Exception Period 1.
Note: To clear an entry or existing data, press the FLASH
key.
10. Press the HOLD key. Next Exception Day mode displays
11. To set additional Exception Day modes, press the volume
up or down key or press the HOLD key to move to the
desired mode.
Desired Exception Day mode displays
12. Repeat steps 7-11 until all Exception Day modes are set.
(Up to 6 exception periods may be specified.)
Note: The entry positions are listed in Table 11 on page
101.