Panasonic 524X07801B - Manual (Page 209)

Section 700 - Operation Chapter 6. DSLT Features
576-13-700 DBS 576 (USA), Revised 6/11/98 209
Operation
To use Extension Busy Override:
Hardware Requirements
• N/A
Related Programming
• FF1-0-01: Splash Tone (Busy Override)
• FF1-0-03: Extension COS (Manual DND Override Send)
• FF1-0-03: Extension COS (Forced DND Override)
• FF1-2: Dial Plan
• FF3: Extension COS
• FF3: Data Security
Considerations
• You cannot break in on three-party conference calls.
• The default for the Override Alert Tone is off. If the Override Alert Tone is enabled, the tone will
be sent to both parties when a call is overridden.
Callback Request
CPC-96, CPC-288, and CPC-576 Version 1.0
Description
If you dial a busy extension, Callback Request enables the System to call you back when that
extension becomes free. When you answer, the System automatically rings the called party again.
Operation
To set a Callback Request:
Action Result
1. Lift the handset or press the ON/OFF key. Intercom dial tone
2. Dial the extension number. Busy tone
3. Enter the Busy Override code (default = 9). • Alert tone sounds to both extensions
(system programming required)
• Connected to both parties
Action Result
1. Lift the handset or press the ON/OFF key. Intercom dial tone
2. Dial the extension number. Busy tone