Panasonic 524X07801B - Manual (Page 127)

Section 700 - Operation Chapter 5. Key Telephone Features
576-13-700 DBS 576 (USA), Revised 6/11/98 127
Related Programming
• FF1-0-01: Exclusive Hold (CO Key)
• FF1-0-03: Extension COS (Hold Key Operation - System vs. Exclusive)
Considerations
• Intercom calls will be held as Exclusive when placed on hold by pressing the HOLD key.
Broker’s Hold
Broker’s Hold allows you to toggle between the current call and the last held call by pressing the
HOLD key.
Operation
To place a call on Broker’s Hold:
Hardware Requirements
• N/A
Related Programming
• FF3: Broker’s Hold
Considerations
• In order to use Broker’s Hold with CO calls, the first call must have a possible appearance and
non-appearance, but in the case of appearance, the first call must be one of CO key.
Call Park
You can use the Call Park function to transfer a call, even if you cannot locate the intended recipient
of the call.
CO, Extension, and Network calls may be parked.
There are two ways for an extension to park a call on the DBS 576. One way is to park the call at the
receiving extension and to retrieve the parked call at another extension by dialing the park answer
code plus the parking extension number. The other way is to park the call at another extension and dial
the park transfer answer code at the other extension to retrieve the call.
Action Result
1. Pick up the first call.
2. Press the HOLD key. First call on hold
3. Pick up the second call.
4. Press the HOLD key. Second call on hold, first call retrieved