Onhook dialing, To use onhook dialing, Offhook signaling – Panasonic 524X07801B User Manual

Page 234: After receiving an offhook signal during a call, Onhook dialing offhook signaling

Advertising
background image

234

DBS 576 (USA), Revised 6/11/98

576-13-700

Chapter 6. DSLT Features

Section 700 - Operation

Onhook Dialing

CPC-96, CPC-288, and CPC-576 Version 1.0

Description

Onhook Dialing allows users to dial without lifting the handset. However, the Digital Single Line
Telephone (DSLT) does not have a microphone so you must lift the handset to talk.

Operation

To use onhook dialing:

Hardware Requirements

N/A

Related Programming

N/A

Considerations

N/A

Offhook Signaling

CPC-96, CPC-288, and CPC-576 Version 1.0

Description

Offhook Signaling sends a tone to a busy extension to indicate that another CO call has arrived or a
call is camped on.

Operation

After receiving an offhook signal during a call:

Action

Result

1. Press the ON/OFF key.

Intercom dial tone

2. Enter a trunk access code, or dial an extension number.

3. If you entered a trunk access code in step 2, dial the phone

number. Otherwise, proceed to step 4.

4. When the call is answered, lift the handset to talk.

Action

Result

1. Press the HOLD key.

2. Press the flashing FF key for the CO line of the incoming

call.

Advertising