Panasonic 524X07801B - Manual (Page 62)

62 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 3. System Features Section 700 - Operation
Considerations
• ISDN phones may not set BLF ringing.
• For more information on BLF ringing, see “Line Appearances” on page 163.
Busy Lamp Field Delayed Ringing
Extensions that have Direct Station Select (DSS)/BLF FF keys assigned may be set to delay ring on
those keys.
Hardware Requirements
• N/A
Related Programming
• FF4: FF Key Assignments
Considerations
• ISDN phones may not set BLF ringing.
• For more information on BLF ringing, see “Line Appearances” on page 163.
Slide Ringing
CPC-96, CPC-288, and CPC-576 Version 1.0
Similar to Delayed Ringing, Slide Ringing allows an alternate position to answer calls. If a call is not
answered within a slide ringing time period, the call can be set to ring at another phone with that trunk
key.
One possible use for Slide Ringing is in an office with a common secretary. A non-ringing FF key can
be assigned for each CO trunk used by the group. If a call is not answered within the slide ringing
timer, the call will ring the common secretary.
Hardware Requirements
• N/A
Related Programming
• FF11-02: Slide/Alarm Ringing Timer
• FF2: Trunk setting (Slide Ringing)
• FF4: FF Key Assignment (Direct Line Key)
Considerations
• N/A
Alarm Ringing
Alarm Ringing allows the incoming ringing tone to be changed if the call is not answered in a
predetermined time. This can be very useful in alerting others to pick up unanswered calls.
Hardware Requirements
• N/A