Walking trs class of service, To use a walking class of service code – Panasonic 524X07801B User Manual

Page 289

Advertising
background image

Section 700 - Operation

Chapter 7. SLT Features

576-13-700

DBS 576 (USA), Revised 6/11/98

289

Walking TRS Class of Service

Walking TRS Class of Service allows an extension user to “carry” his or her toll restrictions to another
phone.

Before the Walking TRS Class of Service feature can be used, a Walking Class of Service code must
be entered at your extension before using dialing privileges at another extension.

Operation

To use a Walking Class of Service code:

Hardware Requirements

N/A

Related Programming

FF8-1-08: Walking Class of Service Code

Considerations

The same Walking Class of Service code can be used on more than one extension.

Walking Class of Service mode is kept until the user goes on-hook.

ARS and TRS dialing privileges follow the Walking Class of Service.

Before entering a new Walking COS code, you must first clear the existing code.

When Walking COS is used, Wxxxx (where xxxx is the user’s extension number) appears in
SMDR.

Action

Result

1. Lift the handset or press the ON/OFF key of an extension

other than your own.

Intercom dial tone

2. Enter 87.

3. Dial your extension number.

4. Enter your Walking Class of Service code (0001-9999)

5. Enter a trunk access code (9 or 81-84)

6. Dial the phone number.

Walking Class of Service remains in
effect until you replace the handset.

7. Replace the handset or press the ON/OFF key.

Advertising