To seize an idle trunk – Panasonic 524X07801B User Manual
Page 193
Section 700 - Operation
Chapter 5. Key Telephone Features
576-13-700
DBS 576 (USA), Revised 6/11/98
193
To seize an idle trunk:
Hardware Requirements
•
N/A
Related Programming
•
FF1-3: MCO Access
•
FF1-2: Dial Plan
•
FF5-2: MCO Trunk Group (Outbound)
•
FF7: ARS/TRS
Considerations
•
The System supports up to 576 outside lines in a six-cabinet configuration. These lines can be
divided into 99 different trunk groups.
•
Each trunk group can support up to 50 outside lines.
•
Each MCO Tenant Group can have up to 5 MCO trunk access codes. System defaults for MCO
trunk access codes are displayed in the following table.
•
MCO1 can have up to 5 trunk groups assigned by the Advanced Trunk Group feature.
•
MCO1 access code is used for Automatic Route Selection (ARS) access code.
Table 14. MCO Trunk Access Codes
Action
Result
1. Lift the handset or press the ON/OFF key.
Intercom dial tone
2. Enter the trunk access number (9 or 81-84). (See Table 14.)
• Outside dial tone
•
CO XXX
displays (where XXX = trunk
number)
3. Dial the phone number.
Dialed phone number displays
MCO Group
Trunk Access Code
MCO1
9
MCO2
81
MCO3
82
MCO4
83
MCO5
84