Panasonic 524X07801B - Manual (Page 239)

Section 700 - Operation Chapter 6. DSLT Features
576-13-700 DBS 576 (USA), Revised 6/11/98 239
To dial a PSD number by entering the speed dial bin number:
To delete a PSD number:
Hardware Requirements
• N/A
Related Programming
• FF8-1: PSD Numbers
• FF8-1: PSD Names
Considerations
• Storing a new number erases any previously stored data.
• Speed Dial numbers can contain up to 24 characters. The following table reflects which keys to
use.
Action Result
1. Lift the handset or press the ON/OFF key. Intercom dial tone
2. If necessary, access an outside line. Outside dial tone
3. Press the AUTO key.
OR...
Enter the Speed Dial Originate code (default = 80).
4. Enter the PSD bin number (80-99).
5. Complete the call and replace the handset or press the ON/
OFF key.
Action Result
1. Lift the handset or press the ON/OFF key. Intercom dial tone
2. Enter the Speed Dial Set/Clear code (default = 710).
3. Enter the PSD bin number (80-99).
4. Press the HOLD key.
5. Replace the handset or press the ON/OFF key.
To indicate . . . Enter/Press
Digit or character 0, 1 - 9, *, #
Intercom Level * AUTO * #
MCO Code ** AUTO * 0
Pause REDIAL
DP - DTMF Code AUTO * *
SSD Code AUTO NN(N)
Hyphen (-) PROG