Panasonic 524X07801B - Manual (Page 259)

Section 700 - Operation Chapter 7. SLT Features
576-13-700 DBS 576 (USA), Revised 6/11/98 259
• FF1-0-03: Extension COS (Call Forward/No Answer)
• FF1-0-03: Extension COS (Call Forward/Other)
• FF1-2: Dial Plan
• FF3-0: Extension COS Assignment
Considerations
• Calls cannot be forwarded to an extension that already has Call Forwarding or DND activated.
For example, extension 220 can only forward to extension 225 if 225 is not forwarded.
• Call Forwarding - Busy and Call Forwarding - No Answer can both be set at the same time.
• You can cancel both Call Forwarding and DND by entering 7 * *.
• An auto camp-on to a busy extension will forward to the Call Forward No Answer destination. A
manual camp-on to a busy extension will not forward.
• If Call Forwarding No Answer and DND are both set, calls immediately forward to the Call
Forward No Answer destination.
Call Hold
CPC-96, CPC-288, and CPC-576 Version 1.0
Description
The system provides the following types of Call Hold:
• System Hold
• Floating Hold (Retrieve Only)
• Exclusive Hold
• Broker’s Hold
• Call Park (Station)
System Hold
You can place either an outside or intercom call on System Hold. You can retrieve a call placed on
System Hold from any extension that has a line appearance for the held call.
Operation
To place a call on System Hold:
To retrieve a call placed on System Hold:
Action Result
1. While on a call, hookflash. Intercom dial tone
Action Result
1. If onhook, go offhook. Intercom dial tone
2. Hookflash. Retrieve call