Panasonic 524X07801B - Manual (Page 318)

318 DBS 576 (USA), Revised 6/11/98 576-13-700
Appendix A. ARS and TRS Operation Section 700 - Operation
4. Next the Origination TRS and ARS level and queuing point enable/disable operation is determined for
each class.
Using Table 7, “Example - User Needs Worksheet,” on page 314, each unique origination class is listed.
Using Table 9, “Example - Origination TRS Level Plan,” on page 316 the TRS Level is determined for
each class. Using Table 8, “Example - MCO Tenant/Trunk Groups Worksheet,” on page 315 and Table 10,
“Example - Origination ARS Level Plan,” on page 317, the ARS level is determined for each class.
In this example, we enable Queuing Point so that the system will continuously check for the availability of
a lower cost trunk before selecting a higher cost trunk.
Table A-11. Example - Origination TRS/ARS Class to Level Worksheet
Calls are screened by examining the initial digits dialed. A * is available as a wild card. This represents
any single digit 1 to 9.
When prefix dial is being considered by the system, the system looks for the longest exact match first. The
system considers a wildcard last.
Origination TRS Class Origination TRS/ARS Level (0-9)
Class
Number
User Type(s)
(Executive, Office,
loading dock)
TRS Level ARS Level Queuing
Point
Continue?
1
Executive (Day/Night)
Attendant (Day)
9 3 Y
2
Buyers (Day/Night) 4 3 Y
3
General Office (Day) 3 2 Y
4
General Office (Night)
Attendant Group (Night)
Retail Floor (Day/Night)
2 1 Y
5
Warehouse (Day/Night) 1 0 Y