Panasonic 524X07801B - Manual (Page 183)

Section 700 - Operation Chapter 5. Key Telephone Features
576-13-700 DBS 576 (USA), Revised 6/11/98 183
To delete an SSD number:
Hardware Requirements
• N/A
Related Programming
• FF1-0-15, 16, & 17: SSD Blocks
• FF1-0-02: SSD Digits
• FF1-0-03: Extension COS (SSD Assignment)
• FF8-1-02: SSD Number
• FF8-1-02: SSD Name
Considerations
• If numbers do not appear on the display when you use SSD codes (00-79 or 000-799), your
extension is not programmed to display that data.
• The System can be programmed to allow SSD numbers to override toll restrictions.
Speed Dial Linking
You can automatically link together up to 6 SSD numbers in 1 PSD bin to handle telephone numbers
longer than 24 characters. You can then dial the entire number by pressing the programmed PSD key
or by entering the speed dial bin number.
Alternatively, any combination of PSDs and SSDs can be manually linked together by pressing the
keys in the desired sequence. This can be useful for prepending account codes or long distance carrier
access codes, etc.
Note: Before linking multiple SSD numbers to a PSD bin, the SSD bins must already have been
programmed with the appropriate speed dial information.
Action Result
1. Lift the handset or press the ON/OFF key. Intercom dial tone
2. (A) Press the PROG key.
(B) Press the AUTO key.
OR...
(A) Enter the Speed Dial Set/Clear code (default = 710).
3. Enter the SSD bin number (00-79 or 000-799).
4. Press the HOLD key. Cleared Spd Dial displays
5. Replace the handset or press the ON/OFF key.