Panasonic 524X07801B - Manual (Page 77)

Section 700 - Operation Chapter 4. User Maintenance
576-13-700 DBS 576 (USA), Revised 6/11/98 77
Hardware Requirements
• N/A
Related Programming
• N/A
Considerations
• N/A
Set Personal Speed Dial Names
Description
For a description of Personal Speed Dial (PSD), see “Personal Speed Dial” on page 179 for a Digital
Key Telephone, “Personal Speed Dial” on page 238 for a Digital Single Line Telephone (DSLT), and
“Personal Speed Dial” on page 282 for a Single Line Telephone (SLT).
3. Press the HOLD key. 8101-
PSD Assignment displays
4. Press the HOLD key. 0 :
PSD Number displays
5. Press the HOLD key. EXT Number displays
6. Dial the extension number.
7. Press the HOLD key. Enter PSD # XXX displays (where
XXX = dialed extension number)
8. Enter the PSD bin number (80-99).
9. Press the HOLD key. YYY ZZ displays (where XXX
= extension number, YYY = assigned
name, and ZZ = PSD bin number)
10. Enter the PSD digits to be dialed.
Note: To clear an entry or existing data, press the FLASH
key.
11. Press the HOLD key to store the entry. Next PSD bin number displays
12. To set additional PSD numbers, press the volume up and
down key or press the HOLD key to move to the desired
PSD bin number.
Desired PSD bin number displays
13. Repeat steps 10-12 until all PSD numbers are entered.
14. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
81-
User MAINT displays
OR...
ON/OFF LED goes off
Action Result