Panasonic 524X07801B - Manual (Page 233)

Section 700 - Operation Chapter 6. DSLT Features
576-13-700 DBS 576 (USA), Revised 6/11/98 233
Operation
To leave a message waiting indication:
To answer a message waiting indication (callback):
To cancel a Callback Message:
Hardware Requirements
• N/A
Related Programming
• FF1-0-03: Extension COS (Message Wait set/cancel)
• FF1-0-03: Extension COS (Priority Message Wait set/cancel)
• FF1-2: Dial Plan
• FF3: Extension COS
Considerations
• The System has priority message waiting for 3rd-party Voice Mail. See “Voice Mail Integration
(Third Party)” on page 68.
Action Result
1. Lift the handset or press the ON/OFF key. Intercom dial tone
2. Dial the extension number. Ring or busy tone
3. While the telephone is still ringing, or when you hear the
busy tone, enter the Message Wait Set code (default = 4).
4. Replace the handset or press the ON/OFF key. Message lamp flashes at called extension
Action Result
1. Lift the handset or press the ON/OFF key. Intercom dial tone
2. Enter the Message Wait Callback code (default = *6). • Telephone automatically dials exten-
sion that sent message waiting indica-
tion
• Message lamp goes off when your call
is answered
Action Result
1. Lift the handset or press the ON/OFF key. Intercom dial tone
2. Enter the Callback Request Cancel code (default = *5).
3. Replace the handset or press the ON/OFF key. Message lamp goes off