To answer a call after it has been announced using, One-touch keys, To program a one-touch key for outside telephone n – Panasonic 524X07801B User Manual

Page 173

Advertising
background image

Section 700 - Operation

Chapter 5. Key Telephone Features

576-13-700

DBS 576 (USA), Revised 6/11/98

173

To answer a call after it has been announced using the OHVA:

Hardware Requirements

N/A

Related Programming

FF1 0 03: Extension COS OHVA Originate

FF1 0 03: Extension COS OHVA Receive

FF3: Extension COS Assignments

FF4: FF Key Assignments

Considerations

The held call is transferred as soon as the extension sending the OHVA hangs up.

If the transferred call is not answered immediately, it will queue for a set time limit, then return to
the extension sending the OHVA by transfer recall timer.

You cannot receive a Call Waiting message during an OHVA.

If a Split key is assigned to the extension that receives an OHVA call, when an OHVA is being
received, the Split key blinks green. If the split key is pressed during an OHVA call to answer,
the Split key lights red. If the split key is pressed again to terminate the OHVA conversation, the
Split key extinguishes.

If you make an OHVA to an SLT, the SLT user and the other party will hear the announcement.

One-Touch Keys

CPC-96, CPC-288, and CPC-576 All Versions

Description

You can use one-touch keys to store telephone numbers, speed dial numbers, or feature access codes.

To dial the stored number, you go offhook and press the desired key.

Operation

To program a one-touch key for outside telephone numbers:

Action

Result

1. Replace the handset.

Your extension rings

2. Lift the handset or press the ON/OFF key.

Action

Result

1. Lift the handset or press the ON/OFF key.

Intercom dial tone

2. Press the PROG key.

3. Press the one-touch key to be programmed.

Advertising