Panasonic 524X07801B - Manual (Page 88)

88 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 4. User Maintenance Section 700 - Operation
Hardware Requirements
• N/A
Related Programming
• N/A
Considerations
• N/A
6. Press the HOLD key. XXX-
Verified ACCD displays (where XXX =
account code table number)
7. Press the HOLD key. 0001 : AAAAAAAAAAA
XXX:Account Cod displays (where
AAAAAAAAAAA = current account
code and XXX = account code table
number)
8. Enter up to ten-digit Verified Account Code. (All Verified
Account Codes must be unique. If there is a matching entry
entered, the System will not accept the entry and will double
beep.)
Note: To clear an entry or existing data, press the FLASH
key.
9. Press the HOLD key. 0002 :X
XXX:TRS Class displays (where X =
TRS Class)
10. Enter the TRS Class to be associated with the Verified
Account Code entry.
11. Press the HOLD key to store the entry. 0001 :YYY displays (where YYY = the
next account code table number)
12. To add additional Verified Account numbers, press the vol-
ume up or down key or press the HOLD key to move to the
desired Verified Account table number.
Desired Verified Account table number
displays
13. Repeat steps 8-12 until all Verified Account numbers are
entered.
14. Press the AUTO key to exit the entry mode Table Number
15. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
81-
User MAINT displays
OR...
ON/OFF LED goes off
Action Result