Perle Systems RIO 5500036-17 - Manual (Page 122)

RIO Remote I/O System User Guide
Installing RIO PCI Host Cards under Windows 2000/XP/Server 2003/Vista/Server 2008
Page 122
Chapter 2 Installing hardware and software
Identifying PCI RTAs
RIO allows you to identify RTAs by flashing the the LEDs on selected units. You can so this
for both single and multiple RTAs. To identify and RTA in this manner proceed as follows:
1. Click the Start button > Control Panel
The control panel window is now displayed.
2. In the Control Panel window, click on the System icon.
The System Properties tabbed window is now displayed.
3. In the System Properties window, click on the Hardware tab.
The hardware page is now displayed.
4. In the Hardware page, click on the Device Manager Button.
The Device Manager window is now displayed.