Creating a login for an rta, Creating a, Login for an rta – Perle Systems RIO 5500036-17 User Manual
Page 72
Advertising
RIO Remote I/O System User Guide
Installing RIO under SCO OpenServer 5 and SCO OpenServer 6
Page 72
Chapter 2 Installing hardware and software
Creating a login for an RTA
To create a login for an RTA in your system configuration, proceed as follows;
1. Login to your system as super user.
2. At the command prompt, type
config.rio
and press the
Enter
key.
The RIO configuration utility window is now displayed.
3. In the RIO configuration utility window, highlight the RTA you want to create a login for
and then press the
Enter
key.
The RTA Management menu is now displayed.
Advertising