Perle Systems RIO 5500036-17 - Manual (Page 35)

RIO Remote I/O System User Guide
Installing RIO under Solaris
Page 35
Chapter 2 Installing hardware and software
Installing RIO under Solaris
This section tells you how to install host cards, software drivers and utilities under the Solaris
operating system and includes the following;
• General setup procedure for Solaris on page 36
• Upgrading from existing device drivers on page 38
• Upgrading your current RIO driver on page 38
• Installing device drivers and utilities on page 39
• Assigning ISA host card addresses and IRQ levels on page 41
• Removing RIO drivers and utilities from your system on page 42
• Setting up terminals using Admintool on page 44
• Removing RIO serial port terminals on page 49
• Updating your RIO system configuration on page 51 .
Note
This version of RIO supports versions 2.6 and 7 of the Solaris operating system.