Adding isa host cards to the system – Perle Systems RIO 5500036-17 User Manual
Page 127
RIO Remote I/O System User Guide
Installing RIO ISA Host Cards under Windows 2000
Page 127
Chapter 2 Installing hardware and software
Adding ISA host cards to the system
When you physically install an ISA host card in your system you also need to add the card to
the list of installed devices in the system.
To add ISA host cards to your system proceed as follows;
1. Download the lastest RIO driver zip file,
rio-x86.zip
, from the Perle website.
2. Unzip the driver zip file to a local directory.
3. In the Windows desktop, click on the
Start
button and select
Settings > Control Panel
.
The control panel window is now displayed.
4. In the control panel window, double click on the
Add/Remove Hardware
icon.
The Add/Remove Hardware Wizard is now displayed.
Note
The addresses used by RIO host cards are normally set by default.
This procedure is used when you wish to set non-standard addresses.