Removing rio serial port terminals, Removing rio, Serial port terminals – Perle Systems RIO 5500036-17 User Manual
Page 49
Advertising
RIO Remote I/O System User Guide
Installing RIO under Solaris
Page 49
Chapter 2 Installing hardware and software
Removing RIO serial port terminals
To remove any RIO serial ports configured as terminals proceed as follows;
1. In the Solaris desktop, single click on the
Application Manager
toolbar icon shown in the
next picture.
The Application Manager window is now displayed.
2. In the Application Manager window, double click on the
System_Admin
folder.
The System_Admin window is now displayed.
3. In the System_Admin window, double click on the
Admintool
icon.
The main Admintool window is now displayed as shown in the next picture.
Double click here to start
Application Manager.
Advertising