Perle Systems RIO 5500036-17 - Manual (Page 249)

RIO Remote I/O System User Guide
RIO system commands under Solaris/Linux/LynxOS
Page 249
Chapter 5 RIO command line utilities
rioreboot
Operating systems Available under: Solaris, Linux and LynxOS .
Function Reboots a specified RTA. Equivalent to power-cycling the device.
Syntax rioreboot [-h] [-v] <name or unique num>
rioreboot [-v] -n
Argument
descriptions
Examples rioreboot 0x94000c1e reboots the RTA with the unique ID 0x94000c1e .
rioreboot -n reboots all RTAs connected to another host card. Typically this is used with
Dual Host Failsafe when transferring control to a slave host card.
Argument Description
[-h] Prints a usage message.
[-v] Displays information about the current progress of a reboot.
-n Reboots any network interconnected RTA’s present on the
network.