Perle Systems RIO 5500036-17 - Manual (Page 306)

RIO Remote I/O System User Guide
Windows NT troubleshooting
Page 306
Messages which are common:
Message Reason Action required
No host cards found Host card is not found 1. Install card.
2. Alternatively, alter memory
address/interrupt settings with
RIOCONF.
Can't boot host card Problem with host
card 1. Check card installation,
2. Alternatively, alter memory
address/interrupt settings with
RIOCONF.
Resource conflict detected Possible host card
clash 3. Alter host card memory address
and interrupt with RIOCONF
Host card physical
address collision detected
at %2 serial numbers are
%3"
Host card clash 4. Alter host card memory address
and interrupt with RIOCONF