Perle Systems RIO 5500036-17 - Manual (Page 52)

RIO Remote I/O System User Guide
Installing RIO under SCO OpenServer 5 and SCO OpenServer 6
Page 52
Chapter 2 Installing hardware and software
Installing RIO under SCO OpenServer 5 and SCO
OpenServer 6
This section tells you how to install host cards, software drivers and utilities under the SCO
OpenServer operating system and includes the following;
• General installation procedure for SCO OpenServer 5 and SCO OpenServer 6 on
page 53
• Installing device drivers and utilities on page 54
• Configuring ports with config.rio on page 64
• Adding an RTA to the system on page 65
• Removing an RTA from the system on page 69
• Creating a login for an RTA on page 72