Printronix ThermaLine Series - Manual (Page 112)

Commands 4–68
Example The following example specifies 2 horizontal lines. The first line uses the
character row in the R parameter, and the second line uses CP.DP format.
To illustrate positioning, the starting row and column are indicated on the
example but do not necessarily reflect actual location on the page.
HORZ
1;60;15;65
1;60.5;15;65
STOP
horz.ex
COLUMN 15
ROW 60
COLUMN 65
ROW 60.5
NOTE: If the SCALE;DOT command is used to specify the dot resolution,
then the line thickness will be specified in that scale.