Printronix ThermaLine Series - Manual (Page 95)

4–51 Commands
Execute Form: General Format
Purpose Prints forms created in the CREATE mode.
Mode NORMAL
Format (cc)EXECUTE ;formname [;PAGEn] [;FC] [;ICNTn] [;IRSTn]
[(cc)AFn; (D)ASCII text(D)]
[(cc)BFn; (D)data(D)]
[(cc)IAFn; [idir] STEPMASK; [RPTn;] [RSTn;] (D)STARTDATA(D)]
[(cc)IBFn; [idir] STEPMASK; [RPTn;] [RSTn;] (D)STARTDATA(D)]
[Overlay Data]
[Form Feed character]
(cc)NORMAL
(cc) The Special Function Control Character.
EXECUTE The Execute Form command; enter EXECUTE.
formname Identifies a previously defined form by name. Enter the
form name exactly as used when created.
PAGE n The optional Pagination command; enter PAGE and
replace n with the decimal number of the starting page
in a sequence of multiple pages. The number may be
eight digits long and range between 0 and 99999999.
The next page after 99999999 is 0. Leave a blank
space between the PAGE command and the n value.
The page number will print on the form in the location
defined by the Page Number command in the Create
Form mode. If the location of the pagination field was
not specified in the Create Form mode, the page field
is printed in the upper left corner of the form.