Printronix ThermaLine Series - Manual (Page 130)

Commands 4–86
Reverse Print
Purpose Defines an area of the form where form elements are reverse printed (white
on black).
Mode CREATE
Format REVERSE
[DARK;] SR; SC; ER; EC
STOP
REVERSE The Reverse Printing command; enter REVERSE.
DARK Optional parameter to select a denser black
background. Enter DARK, or DA, to select the denser
background. More information about dark printing is
provided on page 4–10.
SR Defines the starting row of the reverse print field. Enter
a value ranging from row 1 through one less than the
length of the form. Character row or dot row is
specified based on the Scale command (page 4–88), or
use the CP.DP format (page 4–7).
SC Defines the starting column of the reverse print field.
Enter a value ranging from column 1 through one less
than the width of the form. Character column or dot
column is specified based on the Scale command (page
4–88), or use the CP.DP format (page 4–7).
ER Defines the ending row of the reverse print field. Enter
a value ranging from row 2 through the last row of the
form. The ending row must be greater than the starting
row. Character row or dot row is specified based on the
Scale command (page 4–88), or use the CP.DP format
(page 4–7).