Printronix ThermaLine Series - Manual (Page 303)

6–35 Form Examples and Exercises
5. Input the Special Function Control Character and Execute command for
the LEFTHAND form just created. Input a blank line, the Special
Function Control Character, and the Normal command to instruct the
IGP/PGL to return to the Normal mode after execution.
Enter Format
~EXECUTE;LEFTHAND (cc)EXECUTE;formname[;PAGE n][;FC]
~NORMAL (cc)NORMAL
6. Use system commands to exit the HNDLGO.FOM file and print. The
finished program and logo should look like the following sample. If
error messages occur, refer to “Solving Program Errors” on page 6–49 .