Printronix ThermaLine Series User Manual
Page 92
Advertising
![background image](/manuals/181180/92/background.png)
Commands
4–48
End
Purpose
Terminates the current mode of operation and must be used before entering
a new mode command (EXECUTE, LOGO, NORMAL, or even CREATE).
Mode
CREATE
Format
END
Comments
After the End command is received, the IGP/PGL flushes program errors,
stores the error–free portions of the form program just completed, and then
returns to the Normal mode. If the debug slash (/) is included in the Create
command, the program prints with any corresponding error messages.
Advertising