Printronix ThermaLine Series - Manual (Page 27)

1–15 Introduction
Option Parameter
Value
Comments
Select Font 0 *
1
2
3
4
5
6
7
8
9
10
0 = US ASCII 11–23 = Undefined default to ASCII.
1 = German 24–31 = User–defined symbol set
2 = Swedish from the USET command.
3 = Danish
4 = Norwegian
5 = Finnish
6 = English
7 = Dutch
8 = French
9 = Spanish
10 = Italian
Select LPI 1 – 10 Any integer value from 1 to 10. Default is 6.
Skip Cmd Prefix DISABLE
ENABLE*
DISABLE prints text before a valid IGP/PGL command as
if a line feed preceded the command’s SFCC. ENABLE
ignores any text before a valid command.
Upc Descenders DISABLE
ENABLE*
If ENABLED, human readable text for UPC and EAN bar
codes is embedded within the bar code.
If DISABLED, the text is printed below the bar code.