Promise Technology Network Device EX8654 - Manual (Page 119)

Chapter 4: SuperBuild™ Utility
105
When the buzzer sounds, take the following actions:
•
Check your disk arrays and logical drives.
• Check the Event Log. See page 101.
To silence the buzzer for the current trigger event, you must disable it.
Also see “Chapter 8: Troubleshooting” on page 257.
Enabling or Disabling the Buzzer
To enable or disable the Buzzer:
1.
In the Main Menu, highlight Miscellaneous and press Enter.
2. Highlight Buzzer and press Enter.
3. Highlight your choice and press Enter.
•
Enable
• Disable