Promise Technology Network Device EX8654 - Manual (Page 98)

SuperTrak EX Series User Manual
84
Accessing the Main Menu
The opening screen of the SuperBuild utility is the Main Menu.
Figure 4. SuperBuild Main Menu
The Main Menu (above) has nine options:
•
Controller Selection
– Select which of two SuperTrak controllers you want
to access, if you have two SuperTraks installed in the Host PC
•
Controller Information
– Memory type and size, Firmware and BIOS
version numbers, and address information that may be helpful for diagnostic
purposes
•
Physical Drive Management
– A list of physical drives attached to the
SuperTrak controller, their ID (channel) numbers, model numbers, capacity,
and status
•
Disk Array Management
– A list of disk arrays attached to the SuperTrak
controller, the assigned physical drives, logical drives, capacity, and status
•
Logical Drive Management
– A list of logical drives plus create and delete
logical drive functions
•
Spare Drive Management
– A list of hot spare drives, their characteristics
and status
•
Background Activity
– A list of logical drives, any current background
activity, logical drive status and percentage of activity completed.
Background activities include: Rebuild, Initialize, Synchronize, Migrate, and
Pause/Resume
•
Event Log
– A list of events stored in RAM (since startup) or non-volatile
RAM (since the log was cleared) for diagnosis
•
Time Sync
– Enables you to set the time zone and synchronize system time
and date with the embedded site