Promise Technology Network Device EX8654 - Manual (Page 42)

SuperTrak EX Series User Manual
28
Installing onto Linux
For Linux PCs, Promise offers two different binary files:
•
WebPAM PRO and CLI
– Installs either or both WebPAM PRO and the CLI
•
CLI only
– Installs only the CLI
Note that both of these binary files open in a terminal window and both files use
the WebPAM PRO installer. The procedure below installs the CLI only. To install
WebPAM PRO, see page 47.
To install the CLI onto your Linux PC or server:
1.
Boot the PC or server, log in as root, and launch the Linux GUI.
If the computer is already running, exit all programs. If you are not logged in
as root, log out, then log in again as root.
2. Insert the Software CD into your CD-ROM drive.
3. Copy the CLI_Installer...linux.bin file from the Software CD \CLI\Linux
directory to the /root directory on your PC.
4. Open a terminal window and type sh followed by one space, the exact name
of the CLI_Installer...linux.bin file, then press Enter.
After several moments, the first installation dialog box appears.
Important
Check the SuperTrak Read Me file for any issues pertaining to the
distribution and version of Linux OS running on your PC or server.