Promise Technology Network Device EX8654 - Manual (Page 95)

81
Chapter 4: SuperBuild™ Utility
• SuperTrak BIOS (below)
• Accessing the Main Menu (page 84)
• Selecting a Controller (page 85)
• Viewing Controller Information (page 86)
• Managing Physical Drives (page 87)
• Managing Disk Arrays (page 89)
• Managing Logical Drives (page 92)
• Managing Spare Drives (page 97)
• Viewing Background Activity (page 100)
• Managing the Event Log (page 101)
• Working with Time Sync (page 103)
• Using the Miscellaneous Menu (page 104)
SuperTrak BIOS
This section explains the information that you can obtain from the SuperTrak
BIOS.
When the SuperTrak BIOS loads during bootup, the BIOS displays pertinent
information about the RAID logical drives. At this point, press Ctrl-S to enter the
SuperBuild Configuration Utility.
The SuperTrak BIOS screen displays the following information:
•
Summary of Controller
– The SuperTrak controller model number.
•
Version of Single Image
– The version number of the image used to update
the firmware on the SuperTrak controller.
•
Number of Physical Drives
– The number of physical drives attached to
this controller.
•
Number of Disk Arrays
– The number of disk arrays managed by this
controller.
•
Number of Logical Drives
– The number of logical drives managed by this
controller.
See Figure 1.