Promise Technology Network Device EX8654 - Manual (Page 195)

Chapter 6: Management with the CLI
181
Table of Supported Commands
Command Action
about View utility information.
array View or edit array information.
Create, edit, or delete a new or existing array.
Create, edit, or delete logical drives in an existing array.
To physically locate an array in an enclosure.
Accept an incomplete array condition.
battery Subsystems only. View battery information or to
recondition a battery.
bbm View or clear the BBM defect list of the specified
configured physical drive.
bga View status of all current background activities.
Enable or disable relevant background activities.
Modify the background task rate for each of the
background tasks.
buzz View buzzer status, enable/disable and turn on/off buzzer.
checktable View logical drive error tables.
config For express or automatic configuration.
For advanced configuration please see the 'array'
command.
ctrl View or edit controller information and settings.
date View or edit system time.
enclosure View or edit enclosure and SEP information and settings.
Locate an enclosure via LEDs.
event View or clear events logs.
export Subsystems only. Export files to remote tftp host.
factorydefaults Restore settings to factory defaults.
init View logical drive initialization status and progress.
Start, stop, pause, or resume an initialization or a quick
initialization.