Promise Technology Network Device EX8654 - Manual (Page 127)

Chapter 5: Management with WebPAM PRO
113
Choosing a Display Language
WebPAM PRO displays in the following languages:
To change the display language:
1.
Click the Language dropdown menu in the Header.
2. Highlight the language you prefer.
WebPAM PRO displays in the chosen language.
Viewing the Event Frame
To view the Event Frame, click Show Event Frame in the Header.
To hide the Event Frame, click Hide Event Frame in the Header.
The Event Frame reports all events and stores them in the WebPAM PRO folder
on the hard disk drive of the Host PC.
In the event frame, events are listed and sorted by:
•
Host IP
– The IP address of the Host PC or subsystem where the event
happened
•
WWN
– World Wide Number of the Host PC or subsystem where the event
happened
•
Device
– Disk array, logical drive, physical drive, controller, battery, etc.
•
Event ID
– The hexadecimal number that identifies the specific type of event
•
Severity
– See below:
•
Information
– Information only, no action is required
•
Warning
– User can decide whether or not action is required
•
Minor
– Action is needed but the condition is not serious at this time
•
Major
– Action is needed now
•
Critical
– Action is needed now and the implications of the condition are
serious
•
Fatal
– Non-Recoverable error or failure has occurred
•
Time
– Time and date of the occurrence
•
Description
– A brief description of the event
• English
• Simplified Chinese
• Traditional Chinese
• French
• German
• Italian
• Japanese
• Korean
• Spanish
• Russian