Existing system – Promise Technology Network Device EX8654 User Manual

Page 91

Advertising
background image

Chapter 3: Installing Drivers

77

5.

After those commands finish, type the following command and press Enter.

umount /cdrom

6.

Remove the USB device.

7.

Press Alt+F1, exit the installation, and reboot your PC.

Existing System

1.

Insert the driver diskette or CD, or attach the USB stick.

2.

Log in as root.

3.

Type mount -r /dev/fd0 /mnt/floppy.
Change this command as needed for a CD or USB stick.

4.

Type cd /mnt/floppy
Change this command as needed for a CD or USB stick.

5.

Type ./load.

6.

Type cd; umount /mnt/floppy.
Change this command as needed for a CD or USB stick.

7.

Remove the driver diskette, CD, or USB stick.

8.

Type reboot to restart the system.

Advertising
This manual is related to the following products: