Promise Technology Network Device EX8654 - Manual (Page 33)

Chapter 2: Installation
19
3. Press the arrow keys to highlight Disk Array Management and press Enter.
The Disk Array Management screen appears.
4. Highlight Create Disk Array and press Enter.
The Create Disk Array screen appears.
Use this screen to select the physical drives for your disk array.
5. Press the arrow keys to highlight a physical drive. Then press the spacebar
to select the physical drive.
An asterisk (*) appears at the left of each selected physical drive.
6. Highlight Save Configuration and press Enter.
The Disk Array Management screen appears, showing your new disk array