Promise Technology Network Device EX8654 - Manual (Page 202)

SuperTrak EX Series User Manual
188
Examples
array -v -c 1
array -a add -s "alias=MyArray,mediapatrol=enable" -p 1,3,5~9
-l "raid=5,capacity=50gb,stripe=256kb,sector=1kb"
array -a add -p 1,3,5~9 -l "raid=5,capacity=50gb,stripe=256kb"
-l "raid=0,capacity=100gb"
array -a mod -d 1 -s "alias=YourArray,mediapatrol=disable"
array -a del -d 3
array -a locate -d 0
array -a accept -d 2
array -a addld -d 0 -l "raid=1e,capacity=125gb,stripe=64kb"
array -a delld -l 1
battery
Usage
battery [-a <action>] [-b <batId>]
battery -a recondition -b <batId>
Summary
The battery command displays the status of a battery by the percentage of
charge left.
On subsystems, this command also reconditions the battery. Reconditioning fully
discharges then fully recharge the battery. The battery is reconditioned
automatically once per month.
Options
-a <action> Specifies the action to perform.
list (Default) List information for all batteries or a specific
battery.
recondition Subsystems only. Recondition a specific battery.
-b <battery ID> Specifies which battery in a given enclosure.
1..2
Examples
battery
battery -a recondition -b 1