Promise Technology Network Device EX8654 - Manual (Page 87)

Chapter 3: Installing Drivers
73
SuSE Open 10.2, 10.3, 10.5, 11
New OS Installation
1. Start the SuSE Linux Installation by booting from the install CD.
2. As the system boots, press F6 for the driver diskette, CD, or USB stick.
3. Choose the Yes option.
4. Move the cursor to highlight the Installation option, then press Enter.
5. When the Driver Update Menu pops up, choose your driver diskette, CD, or
USB stick
.
Then click OK and click Back to return to the installer.
6. Follow the on-screen prompts to complete the installation.
Existing System
1. Insert the driver diskette or CD, or attach the USB stick.
2. Log in as root.
3. Type mount /dev/fd0 /media/floppy.
Change this command as needed for a CD or USB stick.
4. Type cd /media/floppy
Change this command as needed for a CD or USB stick.
5. Type sh ./install.
6. Type cd; umount /media/floppy.
Change this command as needed for a CD or USB stick.
7. Remove the driver diskette, CD, or USB stick.
8. Type reboot to restart the system.