Windows vista, New os installation – Promise Technology Network Device EX8654 User Manual

Page 78

Advertising
background image

SuperTrak EX Series User Manual

64

Windows Vista

New OS Installation

The following details the installation of the SuperTrak EX Series RAID Controller
drivers while installing Windows Vista.

1.

Start the installation: Boot from the CD-ROM.

2.

When the “Where do you want to install Windows?” dialog box appears, click
Load Driver

.

3.

Insert the SuperTrak driver diskette into drive A: or attach a USB memory
stick with the SuperTrak driver to the USB port.

4.

In the Load Driver dialog box, click the Browse button.

5.

In the Browse for Folder dialog box, click the diskette or USB stick, then click
the OK button.

6.

In the “Select the driver to be installed” dialog box, highlight Promise
SuperTrak EX [4650, 8650, 8654, 8658, 16650] (tm) Controller

, then click the

Next

button.

7.

When the “Where do you want to install Windows?” dialog box appears
again, in the list of Disks, highlight the Disk representing your logical drive
(the Disk with unallocated space), then click the Next button.

8.

Continue the Windows installation.

Advertising
This manual is related to the following products: